What are the advantages of industrial cleaning machines?

Organic solvents have a long history of industrial application for cleaning of mechanical parts surfaces to remove contaminants. Mechanical parts cleaning machine, is a machine used to clean parts using ultrasonic waves, organic solvents, etc. After a full understanding of the cleaning machine more convenient for you to buy cleaning machines. Let's learn more about the benefits of the industrial cleaning machine.

This passage is going to talk about the followings of industrial cleaning machine:

1) Introduction to Component Cleaning machines

2) Advantages of industrial cleaning machine

3) About us

1) Introduction to Component Cleaning machines

Mechanical parts cleaning machine, is a machine used to clean parts using ultrasonic waves, organic solvents, etc. You can learn more about related cleaning machine equipment through our other articles. Or you can consult our relevant professional staff by phone.

2) Advantages of industrial cleaning machine

Good permeability - The low surface tension (25-30 dynes/cm compared to 72 dynes/cm for water) means that fluids can easily enter or exit parts with complex geometry. Just like those tiny threads and blind holes contaminants can be flushed out.

No chemical residue and broad inclusiveness - solvents are very inclusive and can dissolve most all kinds of contaminants. And solvent cleaned parts in the drying is completed, the surface of the parts will not have chemical residues. Although it is commonly believed that aqueous surfactants are "special agents for dirt" and these surfactant chemicals are used in a large number of production processes, if these surfactants are not adequately rinsed, these non-volatile chemical residues can pose a certain risk to the quality and safety of products.

Clean cleaning quality - In the fully enclosed solvent metal cleaning system, the independent distillation system ensures both clean solvent and pure solvent vapor mist after distillation in each cleaning cycle, which ensures consistent quality of parts cleaning. As the water-based cleaning technology can not guarantee the recycling and cleanliness of water through water distillation, but mainly through the filtration device and the extensive use of water resources to achieve.

Fully dry and safe - the volatility of organic solvents to ensure the drying of mechanical parts is fast and thorough, just compare the latent heat of water and solvent will know, because the latent heat of water is 2280kj/kg, while the latent heat of solvent is 200-300kj/kg. because the latent heat of water is 10 times that of solvent, so water-based cleaning is difficult to thoroughly dry mechanical parts. The latent heat of solvent is only 10% of that of water, which ensures the fast and efficient solvent cleaning and prevents rust spots.

Energy saving and high efficiency - Due to the application of vacuum technology in the cleaning chamber to reduce the boiling point, the remaining part of the heat in the distillation process ensures immediate vaporization, which can increase efficiency to 10 washing cycles per hour.

Environmental protection - the biggest disadvantage of organic solvents is air pollution, but after the use of a fully enclosed cleaning system, these contaminants can be effectively controlled. Similarly, due to the large number of water-based technology relies on the use of surfactants, these can not be fully degraded surface active chemicals will produce large residual pollution of water resources. It is estimated that the pollution of the environment after cleaning ---- water pollution impact is 200-2000 times the use of organic solvents.

Fully enclosed solvent cleaning technology ensures that all the contaminants will be isolated in the distillation tank, we no longer need to consider how to deal with those large amounts of "dirty solvent". In addition, today's solvent providers offer specialized solvent transfer systems for the containment and safe storage and transportation of solvents and solvent residues.

3) About us

ACME is a high-tech enterprise specializing in the development, design, manufacture and sales of automatic welding equipment. We mainly focus on the overseas market and meet the national standards of different countries. We not only provide various standard and non-standard welding equipment, including welding rotators welding positioners, welding manipulators welding robots, but also CNC flame cutting machines, CNC plasma cutting machines, CNC table cutting machines, shot blasting machines and cleaning machines. Our products are widely used in high-tech industries, such as offshore wind power generation onshore wind power generation, offshore shipbuilding pressure vessels, petrochemical industry, etc.