Publish Time: 2021-08-07 Origin: Site
How much do you know about the use of welding rotators? We should pay attention to the maintenance of the product when using the equipment, so what generally need to pay attention to? Then follow me to learn more about it.
Only by mastering the correct use of the welding rotator frame and doing the maintenance work of the equipment can we give full play to the characteristics of the product. We will continue to organize more contents for you, please pay attention.
This passage is going to talk about the followings of welding rotator:
1) How to maintain welding rotators?
2) Periodic inspection and maintenance
3) Conclusion
Welded can-turning roller After use, the need for proper maintenance, not only to extend its service life, but also to ensure the smooth implementation of subsequent work. First of all, you should check whether the external environment of the welding machine frame meets the requirements and confirm that there is no debris interference; then allow it to idle when it is energized. Normal equipment should be free of abnormal noise, vibration and odor.
When the workpiece needs to be placed on the welding rotator frame, the diameter and weight of the workpiece should meet the design requirements, otherwise it will easily cause safety accidents, and also adjust the distance between the main and secondary wheels according to the length of the equipment to reduce unnecessary problems.
Since the welding rotator is a welding aid, it is often used for the main welding of internal and external ring joints and internal and external longitudinal joints of flexible workpieces.
The main components of the welding rotator are the support, the active roller, the transmission, the driven roller, the base and the drive of the power unit. Take a look at the routine maintenance of the welding rotator!
The welding rotator should be cleared of obstacles on the welding roller stand before use, and should not be exposed to fire or oil.
For rolling bearings, it is best to add lubricating oil to the bearings, you can use sodium-based grease.
When using for the first time, remove the gear from the shield and apply an appropriate amount of grease to the gear. For cycloid reducer, the appropriate amount of grease should be added before use, and the remaining oil should be cleaned up when replacing. To ensure that the equipment can work better, lubricate all transmission parts regularly.
In general, welding rotator welding operations in basements, tunnels, metal containers and relatively sealed places, some safety measures must be taken strictly.
Before operation must carefully identify whether outdoor buildings or other structures have an impact on indoor hot welding and cutting, indoor flammable and explosive substances, if necessary, sampling and analysis of gases in the room to confirm the safety of the operation before entering the room. And keep the air circulation.
When using welding rotators for welding operations, keep the welding and cutting parts dry, and strictly check whether the insulation protection equipment meets the safety requirements.
We can also provide many related products and equipment, if you have a need, please contact us.