How to maintain the welding manipulator?

 In recent years, the cheap labor force in the production field has also become a thing of the past. The continuous innovation of industrial robot technology has shortened the marketing cycle of innovative products and improved people's working conditions. Welding manipulator is an important part of the robot system, how to make welding manipulator using time longer?This would require the users in the use of welding manipulator in the process of the daily maintenance work. This article introduces in detail for you about welding manipulator knowledge of daily maintenance.

Here are the main points of the article:

Pay attention to the guide and bearing of welding manipulator

Pay attention to the operation cycle of welding manipulator

Pay attention to the welding manipulator wiring of wear and tear

(1)     Pay attention to the guide and bearing of welding manipulator

Guide should keep all welding manipulator shaft and bearing cleaning and good lubrication performance.If the welding manipulator operation in dusty environment, you need to often clean up the guide rail. If you find any scrap of metal or powder, it may indicate poor lubrication. To ensure proper lubrication, a proper linear guide system is critical, most of the welding manipulator with automatic lubricating system and needs regular replacement of parts.

(2)     Pay attention to the operation cycle of welding manipulator

Keep welding manipulator running is one of the main points of the simple look and listen, do it can expose the welding manipulator overall run a lot of information. The welding robot manipulator through concrete actions work, so listen to any abnormal sound, such as the noise, click the show that bearing not rotating properly or some other component is stuck. Welding manipulator links section along with the power cable and the vacuum hose guide rail movement, have a normal tick, but the sound smooth and stable. Check any bearings that can be observed to ensure they rotate smoothly. Only need to check and listen to some signs of wear or need to adjust, can greatly help to keep welding manipulator best running state.

(3)     Pay attention to the welding manipulator wiring of wear and tear

In the check of welding manipulator surface, if it is found that black granule or powder, then welding manipulator circuit wiring signs of wear.But, even if you can't find these wear signals, carefully check all the power, transformer or encoder cables, wiring paths on both sides of inside and outside also can, because during the production cycle, continuous friction welding manipulator wiring, wiring or connected to the cable guide rail, eventually wear out and invalid.Ensure the safety of wiring and cable installation.

That is about the welding manipulator of the daily maintenance issues.In daily production process, we don't blindly pursue the production, and ignores the welding manipulator of the daily maintenance issues.In this, it is recommended that the operator to check every day welding manipulator parts, and record the running situation, a good robot can make welding manipulator maximum potential.

 If you need a welding manipulator , please contact us.